Sentry MCBs are of the thermo-magnetic, current limiting type and are available with either Type B or Type C operating characteristics.The operating dolly may be locked in either the ON or OFF position without affecting the ability of the trip mechanism to operate. The contacts themselves are manufactured from carefully chosen materials, selected specifically for their low electrical resistance and low propensity to weld under fault conditions.Positive contact status indicationWhen the green indicator is visible, then a contact gap of 4mm has been achieved. Sentry MCBs may therefore be used as single pole isolating switches where appropriate.TerminalsThe Sentry MCB features tunnel terminals of 35mm2 capacity on all ratings. Each terminal has a protective shutter to prevent cable being installed incorrectly. The terminal screws are touch proof to IP2X, captive and feature combination heads.Modes of operationThe mechanism of the Sentry MCB has been carefully designed and engineered using thermal and magnetic elements to detect over currents due to both overload and fault currents. The MCB will operate and interrupt the supply to prevent damage to the installation.The thermal component is a carefully calibrated, thermally operated bi-metal element.Larger overloads and fault current situations are dealt with using the magnetic tripping mode of the MCB. This acts very quickly, overriding the thermal operation.BS EN 60898 requires the tripping to occur within 100 milliseconds and the design of the Sentry MCB allows fault currents of up to 6000A (M6) to be safely interrupted well within this time scale.

This Schneider MCB can be the ideal solution for your home and office because of its long-lasting and durable nature. The breaking capacity of this MCB is as per IEC 60898 and IS/IEC 60898. It can be easily used for DC application which is up to 60v per pole. It has a higher installation life and has an energy limitation class 3.

Product characteristics2-pole - 230 V~
AC type

• Sensitivity : 30 mA
• In : 25 A
• Number of modules : 2 &4

General characteristicsRCCBs RX³ - residual current circuit breakers from 25 A to 63 A - AC and A types

• Conform to IEC 61008-1
• AC type : detect AC component faults
• A type : detect AC and DC component faults
• Compatible with prong-type and fork type supply busbars
• Do not accept auxiliaries

Legrand’s Moulded Case Circuit Breakers (MCCBs) have been developed to fit seamlessly within any new as well as existing energy distribution set-ups and ensure electrical protection against faults. They comply with stringent quality certification standards.

Features:

• 24 to 84 pole
• Fitted with 250A Din Chassis 25kA/0.1s
• Ample space for wiring
• Double screw, split Earth and Neutral bars fitted
• Slotted ducts for better cable management
• 1 DIN rail or 2 DIN rail knock-out options
• Equipped with sturdy flush lock
• Reversible door
• Hinged escutcheon
• Top and bottom removable gland plates
• Circuit identification and schedule cards provided
• Extension box can be added as an option
• Available with or without Main switch (250A)
• Panel board depth 225mm including door (door = 20mm)

Product Details:

Matching up with the ever-increasing requirements of the customers, our company is engaged in providing Legrand MCCBs.

Features:
 

• High strength
• Longer life
• Nominal costs

General characteristicsIsolating switches RX³ - from 40 A to 80 A

• Conform to IEC 60947-3
• Grey handle
• AC 22 A
• Compatible with prong-type and fork type supply busbars
• Do not accept auxiliaries

Have a rocking life with V-Guard MCB, a range of Miniature Circuit Breakers which will make sure that your home is not just sweet but a safe place to live in too. The moment you have V-Guard MCB installed in your house you can just take a sigh of relief for a lifetime. V-Guard MCB comes with a clear and visible indication for circuit 'ON' 'OFF' status. V Guard MCB's are completely equipped with high quality thermal and magnetic protection modules can sense every each instants of circuitry. Watches the entire circuit and protects your home and appliances from short circuits and over loads and subsequent issues. MCB's are made as per latest international IEC standards with compact body design and beautiful aesthetics. All products are checked by Quality Controller on highly equipped labs of V Guard. Now stay assured for the maximum safety with V-Guard MCB which has been lab tested for improved and rugged design of operating mechanism. It has a silver graphite contact tip for anti-wield property. V-Guard MCB is a suitable choice to make your home safe as it fully complies with the international safety standards of IEC 60898-1. Not only this, its specially designed arc quenching chamber with additional arc diverter and flash back arrestor never ceases a single chance of fire.

Features:

• High quality moulded casing
• State of the art Arc Runner System
• Special design of the arc quenching chamber with additional arc diverter and flashback arrestor
• Clear & visible indication for circuit 'ON' / 'OFF' status

• Improved and rugged design of operating mechanism
• Protects your devices, appliances, and circuits from short circuit and related issues.
• Silver Graphite Contact Tip for Antiweld property
• Fully conforming to International Standards IEC 60898-1

Product Details:

Designed to meet the requirements of modern installations in residential and commercial applications, the new range from Legrand provides effective protection against short circuits, overloads and residual current faults.

V-Guard RCCB are blessed with a snap second fault sensing as V-Guard RCCB has been designed using high permeability Nano-Crystalline Materials. Come what may, the new V-Guard RCCB will overcome all odds to withstand the operating depreciation due to its improved rugged design and high quality molded casing with superior thermal and dielectric strength. All these features make them a perfect choice for your office or household.Our RCCB's are equipped with high quality precision sensing modules and keeps updated with latest international IEC standards. This can protect human beings from electric shocks and earth leakage related issues. Every RCCB's are checked by our Quality Controller to ensure safety. It's sensitive to the core to sense the faults and danger swiftly as they approach the circuit to occur with on time operation agility. Made from the silver alloy contacts for superior Antiweld property, the RCCB assures quality at any cost. V-Guard RCCB is fully compliant to international standards of IEC 61008-1. Make your home or office shock proof with V-Guard RCCB.

Features:

• High quality moulded casing
• Improved sensitivity for quick operation
• Silver alloy Contacts for superior 'Fault withstanding Capability'
• Rugged and Highly reliable Switch Mechanism for long service

• Improved and rugged design of operating mechanism
• Protects you and your family from shock and earth leaking issues.
• High Permeability Nano Crystalline Materials used for fault sensing Cores
• Fully on forming to latest International Standards IEC 61008-1

Product Details:

We are offering L&T Tripper to our clients.